MAX-II Ultrasonic Bolt Tension Meter Z-197-0001The MAX II Ultrasonic Bolt Tension Monitor is designed for precision measurement of fasteners up to 100 ft / 30 m in length. It incorporates all of the great features of the original MiniMax unit, wit
TI-MINIMAX Bolt Tension Monitor/Meter/ExtensometerThe TI-MINIMAX Ultrasonic Bolt Tension Monitor, is a state of the art instrument designed to measure elongation produced by tightening a threaded fastener.
136-2 Web Tension Meter For Paper MakingThe 136-2 Hand-Held Tension Meter accurately measures the line tensions on running WET & DRY FELTS as well as on the FORMING FABRIC, SIEVE or WIRE.
136-3P Carrier Rope Tension Meter136-3P Tension Meter accurately measures tension on braided carrier ropes used in the paper making process.. even at speeds up to 3000 meters/min.
BTM-400PLUS Belt Tension Meter (Trummeter)Optical Sensor is unaffected by noise. Supplied with 2 sensor probes-plug-in type for one-hand operation and cable-connected type for limited-access locations.
136-3E Wire/Cable Tension MeterDesigned for measuring wires & cables that are fixed at both ends. (closed system). 5 Ranges, up to 1,000lb.
Dillon AP DynamometerFor tension, traction and weight measurement. Available in capacities from 500 to 100,000 pounds, 200 to 50,000 kilograms, 2,000 to 500,000 Newtons.
CableSafe/Leader Rope Tension Meter/Tension SensorCapacity of 22,000 Lbs (10te). Bluetooth output for use with Smartphone APP (Free Download). Displays & Records Tension, Line Speed & Payout. Export data via email or text.
CBM Cable Tension Meter/CableBull Cable Tension Meter for fixed and moving cables. For material diameters: up to 46 mm, 1-3/4". Capacities up to 20,000 Kg, 44,000lbs or 200kN.
CTM2 Quick-Check Cable Tension MeterCable Tension Meter for Wire Rope and Guy Wire. 2 Ranges, up to 10,000lb Capacity. Measures cables from 3/16 to 1.
DNW Tension Meter for Pretensioned Wire/Fiber RopesTension Meter for Pretensioned Wire/Fiber Ropes. 4 tension ranges from 10-100 kg to 40-400 kg.
Rope diameter:2-4 mm.
RTM High Capacity Cable Tension Meter/Gigasense4 Rangers up to 44,000 lbf Capacity. RTM can be calibrated for up to 10 different wire ropes. RTM-20D / RTM-D 4 Models.
SY Cable/Wire Rope Tension MeterFixed Cables, Wire Rope and Guy Wires. Dial Range of 0-100 units, Requires customer to create calibration conversion chart.
TIMH Running Line Tensiometer/Cable Tension MeterThe TIMH range is a Running Line Tensiometer or RLTM built with dockside, marine, offshore, towage and salvage applications in mind. Capacities up to 80 Tonnes/176,000 lbs.
136-3 Heavy Duty Tension MeterHeavy Duty Hand-Held Tension Sensor for moving cables up to 30 mm diameter. 16 Ranges Offered for tension up to 10 kN/1000 Kgf/2200 lbf.
125-12 Limited Access Tension MeterLimited Access Digital Tension Meter for use with textiles, fibers, yarns. Ceramic thread guides ideal for high speed applications.
BD-435 Electronic Thread Tension MeterFor textile threads and magnetic tapes. Lightweight and Compact - No separate power pack or cable.
DTS Hand-Held Digital Tension Meter12 Ranges 0.2-200g up to 0.6-60kg. High speed data sampling (internal 8 kHz) and recording of MIN, MAX-, last reading, PEAKS, average and standard deviation.
DTSB Narrow Tape/Tow Digital Hand-Held Tension Meter10 Tension ranges available from 5.0-200 cN up to 0.6-60 daN. For use with ribbons, filaments, carbon strands, foils and similar flat materials.
DTSE Limited-Access Hand-Held Digital Tension Meter4 Tension Ranges 1-200g up to 20-2000g. For measurement in areas with limited space or tightly grouped filaments.
DTSF Optic Fiber Digital Tension Meter3 Tension ranges available from 1-200g up to 10-1000g. For diameters up to 1.5mm (0.060").
DTSL Heavy-Duty Hand-Held Digital Tension MeterHeavy Duty Digital Tension Meter for Sensitive Materials. 4 Ranges up to 20 Kg. For Wire & Cables up to 5 mm diameter.
DTWB/DTWX Digital Tension MeterHeavy Duty Digital Tension Meter. 2 Ranges up to 50 Kg. For material diameters up to 6 mm.
DTX Data-Logging Hand-Held Digital Tension MeterDigital Tension Meter with Data Logging and USB Output. 12 Ranges 0.2-200 g up to 0.6-60 kg. High speed data sampling.
DTXB Narrow Tape/Tow Hand-Held Digital Tension MeterFor measuring tensions of textile ribbons, films, foils, fibre bunches etc. 10 Tension ranges available from 5.0-500 cN up to 0.5-50 daN.
DTXE Limited-Access Digital Tension MeterLimited-Access Hand-Held Digital Tension Meter with Data Logging and USB Output. 4 Tension Ranges 1-200g up to 20-2000g.
DTXF Optic Fiber Digital Tension Meter with Data Logging and USB Output3 Tension ranges available from 1-200 g up to 10-1000 g. For diameters up to 1.5 mm. Optional Wi-Fi wireless data output.
DTXL Heavy-Duty Digital Tension Meter with Data Logging and USB Output4 Ranges up to 20 Kg. For Wire & Cables up to 5 mm diameter. Memory for 60,000 data points with USB output.
KXE Warp Tension MeterPortable measuring head to measure yarn groups of weaving and warping machines.
PT-100 Circular Knitting Tension MeterPocket Tension Meter for Circular Knitting Applications with Speed and Length Meter.
PT-100-L Circular Knitting Tension MeterThe PT-100-L digital tension meter is designed for measurement of low tensions of fibers, yarns. etc. typically found on circular knitting machines etc.
ZEF-ZED Limited Access Digital Tension MeterEconomical Digital Tension Meter. 3 Ranges up to 500g. For a wide variety of yarns, fibers and fine wires.
136-2-AMG Hand-held Web Tension SensorHand-held Web Tension Sensor with Adjustable Measuring Geometry. Measures tension on paper and similar materials of any width.
DX2F Limited Access Tension MeterLimited Access Applications. 9 Ranges, 3-30 g to 200-2000 g.
DX2FP Limited Access Tension Meter with Ceramic PinsHigh Speed Filaments/Limited Access. Ceramic Pins allow measuring speeds up to 6000 m/min.
DX2H Closed Force Tension MeterTension meter with hooks instead of guide rollers. 3 Tension ranges from 400-5000 g to 5-20 kg.
DXL Tension meter with large rollers and a wide roller spacingMechanical tension meter with large rollers and a wide roller spacing for measuring optical fibres, cat cables, buffer tubes etc. up to 8 mm Ø. 3 Tension Ranges from 200-2000 g to 2.5-10 kg.
DXN High Precision Tension MeterPrecision Mechanical Tension Meter. 12 ranges, 5-50 g up to 5-50 kg. Large linear dial face.
DXR Tape & Band Tension MeterIt is designed for measuring all of tapes and bands, such as textile ribbons, films, foils, fiber bunches, etc. 6 ranges：200-2000 g up to 5-50 Kg.
EDM Wire Tension MeterTension Meter for EDM applications. Special versions for specific EDM machines are available.
FX2 Optic Fiber Tension MeterOptic Fibers/Fragile Filaments. Large light-weight plastic rollers with 100 mm spacing.
KXB Warp Tension MeterWarps. Frame rests on warp while center pin scoops up ends for measurement.
RX2-BX2 Carbon Fiber/Narrow Web/Tape Tension MeterAvailable with single or dual flanged cylindrical rollers up to 100mm long. Is designed to measure tension of carbon fiber tows, fiberglass, tape and other narrow web materials. 
STM Screen Tension MeterScreen Tension Meter. Designed to measure tension on a screen printing frame
TX2 Tape Tension Meter with rollersTape Tension Meter with rollers point away from operator. Cylindrical rollers pointing away from the operator.
WT-100 Warp Tension MeterTension Meter for textile warps. 0-100 emperical unit scale. Spring Loaded Operation.
ZD2 Economical Tension MeterMechanical Tension Meter for Fibers, Yarns and Fine Wires up to 300 g, 6 Ranges, 3-30 g up to 20-300 g.
ZF2 Tension Meter for Fibers, Yarns and Fine WiresMechanical Tension Meter for low Tension Limited Access Fibers, Yarns and Fine Wires up to 100 g. 7 Ranges, 1-5 g up to 10-100 g.
Zivy Hand-held Tension MeterZivy Tension Meter. 12 Ranges：0.5-3 g up to 50-170 g. Easy To Use.
DX2S Stationary Tension Meter10 Tension Ranges：5-50 g up to 5-50 kg. Stationary analog tension meter for yarn, textile and wire applications.
FX2S Optic Fiber Stationary Tension MeterStationary Tension Meter for Fragile Filaments. 4 Tension Ranges：Up to 1000 grams.
MK Stationary Tension MeterStationary analog tension meter for yarn, textile applications. 8 Tension Ranges：Up to 500 grams.
ODT Stationary Tension MeterStationary analog tension meter for yarn, textile and fine wire applications. 12 Tension Ranges
Up to 1,000 grams.
D-485 Digital Tension Indicator with Built-In AmplifierThe battery-powered D-485 features a digital display with peak capture, adjustable averaging and automatic zero.
DMS485 Handheld Digital Tension IndicatorDigital tension indicator with digital display. Automatic zero setting.
DPM-PCS-02 Digital Panel MeterLED-display with optional limiting value transmitter. 4-digit meter with a bright, 21 mm high LED-display.
DPM502 Digital Tension IndicatorDesigned to connect to the TS621 or TS481 Strain Gauge Amplifier, as well as the RFSE Tension Sensor.
KMV-04 Cable mounted strain gauge measuring amplifierCable mounted strain gauge measuring amplifier.
MU481-19 Tension Amplifier & DisplayCombination Digital and Analog Tension Display Unit for use with strain gauge-based sensors.
MU510-19 Tension Display UnitCombination Digital and Analog Tension Display Unit for use with capacitive tension measuring sensors.
MU621 Tension IndicatorMeasuring amplifier unit for field installation.
MU621-LIMIT Measuring amplifier unit with limit detectionFor use with strain gauge based sensors, 1 or 4 channels. Color touch display makes setup easy.
PD765 Digital Tension IndicatorIt is easy to set up and permits flush panel mounting in a 1/8 DIN cutout.
SC Series Tension IndicatorThe new SC Series Tension Indicators permit the user to connect from one to three THR 3-Roller Tension Sensors.
SC-PM Digital Tension IndicatorTension Display Unit-grams, cN, DaN, Kg and Lbs. 3 different calibrations.
SC4-PM Panel mount digital display unitSuitable for connecting a maximum of 4 sensors with analog output 0–1 V DC or optional series without integrated amplifier.
DT-315AEB Digital StroboscopeDigital Stroboscope with External Battery. Range: 40 - 35,000 RPM/FPM. Power: External Battery.
LS-9-12000-UV/UV Inspection Stroboscope/Black Light StrobeUses Powerful xenon flash tube, 200 Million Flash Lifetime. 9 inch Enclosure width, 10 µs (microseconds) flash duration providing 2000 mJ flash energy.
LS-SCU Remote Control UnitRemote Control Unit for LS-5-12000 Stroboscope.
LS-FCM Flash Control ModuleFlash Control Module.
LS-GAPSENSOR/Label Sensor for Triggering On Label GapsLabel Sensor for Triggering On Label Gaps. Supplied with a DIN connector for direct connection from CHECK-LINE LS-10 & LS-15 linear strobes.
DJ2G Proximity SensorEconomical solution for detecting metal in front of a sensing surface. Features a pre-wired 17 foot cable assembly, zero-sensing capability and small package size.
LS-REGSENSOR Registration Mark SensorColor Mark registration detection on transparent and translucent, including many metalized films and paper.
LS-S50MLR Photo Reflective SensorLS-S50ML is a laser sensor that can be taught to recognize difference in colors.
MCS-655 Photo-Reflective Speed SensorM18 Threaded body housing with two lock (jam) nuts for easy mounting and positioning.
MP-10 Magnetic Pick-Up SensorProvides a sine wave output whenever there is an abrupt change from non-magnetic to magnetic material moving past the sensor pole.
DT-326B High Performance LED StroboscopeWide Flash Range 60 – 120,000 Flashes/min. (1-2000 Hz) can be adjusted to meet almost any high-speed application.
DT-365/ DT-365E Battery Powered LED StroboscopeHigh-Intensity, Battery Powered LED Stroboscope. Bright LED display and simple controls aid in user operation. Range: 60 - 120,000 FPM.
ESL-200 Hand-held LED StroboscopePortable LED Stroboscope. Flash Range: 6.0 - 150,000 fpm/rpm. Made in the USA.
ST-320BL Black Light LED StroboscopeFlash Range 60 – 120,000 Flashes/min. (1-2000 Hz), user adjustable.
"x2" and "1/2" keys to quickly "double" or "half" the flash.
AS4000 Machine Vision StroboscopeMachine Vision Stroboscope. 3 Models with Flashrates up to 200 Hz.
Variable intensity control.
DS-2000LED LED Stroboscope7 High-Powered LEDs produce peak brightness of 3000 Lux.
Flash range of 30 - 300,000 fpm (0.5-5000 Hz).
DS-2000LED-OT LED Stroboscope with external trigger input/output7 High-Powered LEDs produce peak brightness of 3000 Lux.
Flash range of 30 - 300,000 fpm (0.5-5000 Hz).
DS-2000LED-UV UV LED StroboscopeThe DS-2000LED-UV is a battery powered hand-held LED blacklight stroboscope designed for inspecting UV ink on labels, security tags, watermarks and more.
DT-311A AC Powered Digital StroboscopeFfor process inspection and non-contact RPM measurement. Portable, inspection and observation of moving parts by "freezing" or "slowing down" the action.
DT-311J /NEMA 4X StroboscopeNEMA 4X Stroboscope for Harsh, Wet Work Areas.
Range: 200-1,500 RPM/FPM. Power: AC 115 or 230 V.
DT-315A Battery Powered Digital StroboscopeDigital Stroboscope with Internal Battery.
Range: 40 - 35,000 RPM/FPM. Power: Internal Battery.
DT-315P /NEMA 4X StroboscopeNEMA 4X Stroboscope for Harsh Usage.
Range: 60.0 ~ 3,000 FPM. Power: Internal Battery.
DT-326 portable stroboscopeHigh Performance LED Stroboscope. 60-120,000 flashes per minute, can be applied to meet almost any HIGH-SPEED application.
DT-361 High-Intensity LED StroboscopeHigh-Intensity LED Stroboscope AC Powered.
Range: 60-120,000 FPM. Accuracy: ±0.02% of reading
DT-725 Battery Powered Digital StroboscopeBattery Powered Digital Stroboscope. Range: 40-12,500 RPM/FPM.
LS-18-LED Inspection Stroboscope200 Hi-Powered LEDs produces peak brightness of 9000 Lux. LED Inspection Stroboscope, 18 Inch Width covers web widths up to 20" (500mm) and wider.
LS-3-LED Inspection Stroboscope40 Hi-powered LEDs produces peak brightness of 5000 Lux. Built-in Flash Control.
LS-36-LED Fixed-Mount Inspection StroboscopeAdjustable brightness and image sharpness allows optimal setting for each application. 480 Hi-powered LEDs produces peak brightness of 14,000 Lux.
LS-5-12000 Inspection StroboscopeInspection Strobe, 5 Inch using Xenon Flashtube. For process inspection including, rewinders, slitters and similar equipment.
LS-5-LED Inspection Strobe Light80 Hi-powered LEDs produces peak brightness of 6000 Lux. LED Inspection Stroboscope, 5 Inch Width covers web widths up to 12" (300mm) and wider.
LS-9-12000 Web Inspection StroboscopeInspection Strobe, 9 Inch using Xenon Flashtube. Unmatched brightness, sharpness and uniformity from any strobe in its class.
LS-9-LED Inspection Stroboscope120 Hi-powered LEDs produces peak brightness of 7500 Lux. LED Inspection Stroboscope, 9 Inch Width covers web widths up to 16" (400mm) and wider.
MVC-4000 Machine Vision Stroboscope ChassisChassis Mount Machine Vision Stroboscope. 3 Models with Flashrates up to 60 Hz. Variable intensity. control.
NS-600 LED StroboscopeHigh efficiency LED solid-state light source - never needs replacement. Wide measuring range - up to 120,000 fpm/rpm.
PK2X Pocket StroboscopeBattery Powered Stroboscope. Range 30-12,500 RPM/FPM. Power Internal Battery or AC-Power.
PK2X-AC Portable StroboscopeType New & Improved Pocket-StrobeTM, Compact AC Powered Stroboscope. Range 30-12,500 RPM/FPM. Power AC-Power. Continuous use with AC-Adapter, 50% brighter then PK2.
QB-LED Battery Powered LED Stroboscope40 High-Powered LEDs produce peak brightness of 5000 Lux. Battery Powered, Portable LED Stroboscope. Flash range of 30-300,000 fpm (0.5-5000 Hz).
QB-LED-AT Light Therapy StroboscopeAC Powered LED Stroboscope with 40Hz flash rate (40 flashes per second).
QBS-LED 118 High-Powered LEDs Stroboscope118 High-Powered LEDs produce peak brightness of 10000 Lux. Flash range of 30-300,000 fpm (0.5-5000 Hz). Includes Slow-Motion, Phase-Shift, Multiplier & Memory.
TM-4100/TM-4100D Tachometer1.Large LCD 6 digits with backlit.
2.Measuring by the output of red visible-spectrum light.
3.Measurement distance: 40~500mm.
4.Memory of 200 data.
5.USB datalogger up to 30,000 data (TM-4100D).
A2100/01Spare contact adapter for compact tachometers. Surface speeds and rpm measurements can be made by attaching this accessory to the listed Tachometers.
A2109World’s first intrinsically safe Hand Tachometer. Allows use in a wide range of hazardous environments in petrochemical, Gas & volatile materials processing industries.
CT6Optical/Contact Hand Tachometers with LED display. Including standard optical system range up to 3ft (1M) or with a Laser system with a range up to 6ft (2m) for enhanced optical performance. 
MiniVLSThe MiniVLS series Optical Sensors are primarily designed for speed related applications, including very high speed monitoring.
MiniVLS nLOptical Speed/Phase Sensors with NPN Pulse Output. These Sensors are primarily designed for Phase related rotational speed applications, including very high speed monitoring and are available with eit
MT2013 Tachometer CalibratorThe MT2013 Tachometer and stroboscope calibration test system is designed for test and calibration of Digital Optical Tachometers, Optical Speed sensing products and Stroboscopes.
VLSThe VLS series of Visible Light Optical Sensors is primarily designed for speed related use. Ideal for use with our range of Digital Tachometers, including hand held, panel mounted and bench style ins
A2103 Hand-Held Combination Contact/Non-Contact TachometersCombination Contact & Non-Contact Tachometer with Memory and Optional Pulse Output
A2103/LSR/K Advent Professional Optical/Contact TachometersCombination Contact & Non-Contact Tachometer with Internal & External Laser Sensors.
A2106 Diesel Engine TachometerThe A2106 is an ideal test Tachometer for most diesel engine applications, it functions with all types of Diesel engines.
A2107 Engine Tachometer (Diesel/Petrol/Contact & Optical Laser)The A2107 is ideal for testing all types of engines and rotating component speeds such as Fans, blowers & transmissions. 
A2105 Gas Engine TachometerThe A2105 measures RPM of 2 & 4 Stroke Gas / Petrol Engines with a Non-Contact Antenna Sensor or Clip-On Remote Cable Sensor. 
CDT-1000HD Non-Contact TachometerCDT-1000HD Hand-Held Digital Tachometer accurately measures rotational speed (RPM) using a visible beam of light. 
A2109 Intrinsically Safe TachometerHighest level of certification EEx ia IIC T4 - ATEX II 2 G, allows use in a wide range of hazardous environments in petrochemical, Gas & volatile materials processing industries. 
CDT-2000HD Combination Contact and Non-Contact Digital TachometerCDT-2000HD combines the best features of both contact and non-contact models to accurately measure RPM, surface speed and length.
DT-105A - DT-107A Hand-Held Contact TachometerAccurately measure rotational and surface speed, as well as length. Built-in selector switch permits the user to display readings in a wide variety of engineering units.
DT-205LR - DT-207LR Contact & Non-Contact TachometerCombine the best features found in both contact and non-contact tachometers for the accurate measurement of rpm, surface speed and length. 
DT-105A-12CBL Tachometer for Elevator Cable SpeedIt is supplied with a rugged 12” circumference wheel with large flanges to keep the cable in contact with the surface. 
CDT-2000HD-TW Welding Wire Speed Meter/Combination Tachometer kitFor use on Welding Wire Diameter Range of 0.032" - 0.120" (0.8 to 3.0mm)
CDT-2000HD-TE Wire, Cable, and Rope Speed Meter/Combination Tachometer kitAllows the device to measure speed and length of wires, cables and ropes up to 8 mm diameter, e.g.in elevator applications.
DT-2100 Tachometer with USB Output - Contact/Non-ContactThe DT-2100 features data-logging, USB output and a programmable scaling feature to offset RPM according to application variables. 
ET-2109LSR Intrinsically Safe TachometerET-2109 explosion proof tachometer is certified EEx ia IIC T4 - ATEX II 2 G.
MT-200-SH Contact/Non-Contact Pocket TachometerCombination Contact/Non-Contact Pocket Tachometer with microprocessor technology possesses the precision of the our standard full size tachometers.
PLT-5000 Contact / Non-Contact Laser TachometerThe PLT-5000 Pocket Laser Tachometer accurately measures RPM and Surface speed using contact or non-contact measurement techniques. 
3030AN Magnetic sensor, requires CABLE-3030This general-purpose unit is designed to mount in a 5/8"-18 threaded hole and is provided with a jam nut for sensor securing. 
3070-XP12010 Explosion Proof Magnetic Pick-Up SensorSpecifically engineered for use in the oil and petrochemical industries, this stainless steel sensor is completely sealed and explosion-proof. 
BI2-S12 Proximity SensorThree wire DC normally open NPN (sinking) type proximity switch.
DJ2-G Proximity SensorEconomical solution for detecting metal in front of a sensing surface; metal objects adjacent to or behind will not normally be detected. 
DT-501X Panel Meter TachometerGreat versatility with multiple sensor input capability in one unit: NPN open collector, contact and square or sine wave sensor inputs
DT-5TXR Panel Tachometer with Optional Output ModulesAccepts up to two output modules allowing voltage, current, BCD, NPN & relay output combinations for control or remote process monitoring.
FAC-1 Frequency to Analog ConverterThe FAC-1 is used to convert frequency inputs from speed sensors into a linear analog signal.
MCS-3109 Proximity SensorComplimentary (NPN-NO and NPN-NC) proximity sensor normally used in high-vibration areas and where a greater sensing distance is required.
MCS-625 Photo Reflective SensorConsists of a LED infra-red light source sensing device and amplifier contained in a heavy-duty housing. 
SE-G2 solid state proximity switchMaximum switching frequency is 8 kHz with a maximum sensing distance of 1.0 mm, gear pitch must be between 25.4(min) and 16.93(max).
CDT-ADAP Contact ApdapterContact Apdapter for CDT-2000 and CDT-2000HD
CDT-ADAP-CS20 Wire/Cable/Rope Speed AdaptorAllows the device to measure speed and length of wires, cables and ropes up to 8 mm diameter, e.g.in elevator applications.
CDT-ADAP-TW Welding Wire Feed Speed Meter/AdapterFor use on Welding Wire Diameter Range of 0.032" - 0.120" (0.8 to 3.0mm) 
CDT-WHEEL 0.1 m Circumference WheelFor use with models: CDT-2000, CDT-2000HD, YSL-2000, YSL-2000HD
DT-ADP-200L Contact AdapterContact Adapter for DT-205L, DT-207L and DT-209X tachometers
DT-ADP-200LR Contact AdapterReplacement Contact Adapter for DT-205LR and DT-207LR
DT12 / FPM-12 12 inch Circumference Tachometer WheelSlide on 12 inch circumference (3.82" diameter) wheel for tachometers with 7mm shafts.
DT6 / FPM-6 6 inch Circumference Tachometer WheelSlide on 6 inch circumference (1.91" diameter) wheel for tachometers with 7mm shafts.
DTCA Tachometer Cone TipSlide on cone tip adapter for tachometers with 7mm shafts.
DTFA Tachometer Funnel TipSlide on funnel tip adapter for tachometers with 7mm shafts.
EHT-600 Digital Tachometer / LengthmeterFour measuring modes: current value, Maximum, Minimum and Mean displays the average.
HTM Hand-Held Mechanical TachometerDesigned to accurately measure RPM and surface speed on a wide range of applications. without the need for batteries.
HTM-100M-ATEX ATEX-Certified TachometerDesigned to accurately measure RPM and surface speed on a wide range of applications. without the need for batteries.
MT-100 Contact Pocket TachometerContact Pocket Digital Tachometer.
Measuring Range: 1.00-25,000 rpm.
MT-Series Mechanical TachometerEddy Current Tachometer. Measuring Range: 2 Models Each with 3 Ranges up to 50,000 rpm. Display Type: Analog.
Germany Combined Hardness Tester NOVOTEST T-UD3 The device operates both UCI (Ultrasonic Contact Impedance) and the Leeb (dynamic) probes. Getting benefit from two types of measurements is the ultimate advantage that a portable device can provide.
Germany UCI Hardness Tester NOVOTEST T-U3The Ultrasonic Contact Impedance (UCI) probe is used for measuring the hardness value of small items, objects with a thin wall, complex form, and to measure the hardness of surface hardened layers.
B
Germany Leeb Hardness Tester NOVOTEST T-D3Dynamic (Leeb) probe is used for measuring the hardness of non-ferrous metals, cast iron, coarse-grained materials, massive products etc.
Built-in camera allows user to take a picture of tested objec
Germany Combined Hardness Tester NOVOTEST T-UD2Combined Hardness Tester NOVOTEST T-UD2 is designed for rapid non-destructive hardness testing of :metals and alloys on standardized hardness scales;metals with different properties from steel (for ex
Germany UCI Hardness Tester NOVOTEST T-U2UCI hardness tester NOVOTEST T-U2 is designed for rapid non-destructive hardness testing of:metals and alloys on standardized international scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (H
Germany Leeb Hardness Tester NOVOTEST T-D2Leeb Hardness Tester NOVOTEST T-D2 is designed for rapid non-destructive hardness testing of various objects.
Leeb Hardness Tester NOVOTEST T-D2 uses dynamic method of hardness testing – Leeb method,
Pen Type Hardness TesterPen type are the portable hardness testing instruments, which integrated the smartest NDT technology and the smallest dimension. 
Germany SCHMIDT Textile Hardness TesterTo measure the winding density (hardness) of textile bobbins, beams, spools, cones, dye packages, etc.
Micro IRHD Hardness TesterMICRO IRHD hardness tester measures hardness of elastomers with thickness from 1 to 5 mm. It is designed to measure according international standards including DIN ISO 48, ISO 48, ASTM D1415, BS 903: 
Macro IRHD Hardness TesterTest according to ASTM D1415, DIN ISO 48, ISO 48 and DIN 53505 international standards with our new Macro IRHD hardness test system is the professional measurement system for hardness tests on elastom
IRHD-MICRO-TB Test block set for verificationA set of 6 test blocks for verification of the IRHD-MICRO Measuring Device according to ISO 48. The Rubber Test Blocks are only for reference. 
IRHD-MACRO-TB Test block set for verificationA set of 7 test blocks for verification of IRHD-MACRO Measuring Device according to ISO 48. The Rubber Test Blocks are only for reference. 
IRHD-ORCD O-Ring Centering DeviceIRHD-ORCD O-Ring Centering Device for IRHD-MICRO
IRHD-XTCD X-Table Centering DeviceThe X-Table centering device works with our IRHD-MICRO hardness tester. 
PRISM-CD Centering DevicePrism Centering Device for IRHD and Durometer Stands.
SH-21 Metal Hardness Tester - Rockwell HRCDisplays hardness in HV (Vickers), HRC (Rockwell), HS (Shore) and HB (Brinnel) units.
QH2 Portable Leeb Hardness TesterQH2 is used to conduct quick and precise measurements on all types of parts and structures made out of steel, stainless steel and alloy tool steel with immediate conversions to the most common hardnes
QH5 Leeb Hardness Tester (Rebound Hardness)Small, robust, precise, repetitive, and easy to use. Offers Cal-Tag technology in all of our impact devices so that they can easily be changed with no need to calibrate the unit.
QH7 Heavy Duty Portable Hardness TesterQH7 is ideal for heavy industries and mining, and are available in Leeb, UCI, or both methods in one unit.
TIME5100 Metal Hardness TesterSteel, cast steel, cold work tool steel, stainless steel, grey/nodular cast iron, aluminium, cast aluminium alloys, brass, bronze and wrought copper alloys.
PosiTector BHI Barcol Hardness ImpressorPosiTector BHI is ideal for measuring the indentation hardness of soft metals (aluminum, aluminum alloys, copper, brass, etc.), harder plastics and fiber-reinforced plastics. 
Asker DurometerThe Asker C Type durometer is commonly used in checking the hardness of rubber material found in the soles of sneakers.
DCD Certified Durometer Test DisksThe DCD Certified Durometer Test Disks are designed for checking durometer indentor extension. 
DIN-FA Durometer Foot AttachmentThe DIN foot is an accessory which can be ordered installed on a new gauge, or ordered separately. It includes and wrench and instructions.
ORF-1 O-Ring Fixturing SetMeasures O-Rings 1/16" to 1/4".
RX-BF "Big Foot" Durometer Foot AdapterThe Big Foot increases the diameter of the foot from 1/2" to 1 3/8" diameter, which makes it nearly impossible for the user to imbed the foot into any test specimen.
RX-CLW Durometer Load WeightThe Constant Load Weight for gauges with an 822g springload slides onto the lower barrel of the gauge, gives it a wider foot, and raises the mass of the gauge to the suggested 1kg.
TBK-HP Test BlockTest Block Kit for Flat Bottom HP Durometers.
V-Block CubeV-Block & Base plate for O-rings and small samples. Allows precise, repeatable measurement of small samples.
CL-150 Constant Load Durometer StandUnique flexible coupling system automatically aligns the presser foot to the surface of sample.
CLE-150 Durometer Motorized Constant StandDurometer Motorized Constant Speed/Load Stand. Adjustable Test speed: 0.1~19.9 mm/sec in .1 mm increments.
e-1000、e-5000 Durometer Constant Load StandThe e-Series constant load stands eliminate different load variables which occur when hand-testing samples with a durometer.
OS-1 Durometer Operating StandDurometer Test Stand for Types A, B, C, D, E, DO, O, OO, OOO and OOO-S. Compatible with RX-1600, RX-2000 & RX-DD Durometers.
OS-2 Durometer Operating StandDurometer Test Stand for Types A, B, E & O.
OS-3 Test Stand for Type M DurometerThe OS-3 test stand for type M durometers is designed for precise testing on type M samples. 
OS-4 Durometer Test StandDurometer Test Stand for Type OO & Type OOO.
OS-AUTO Motorized Durometer Test StandMotorized Controlled Rate of Descent. Provides an electronic timer that can adjust the amount of time the durometer remains in the lowered position (dwell time).
PTS-HP Durometer Test StandDurometer Test Stand for use with HPSA, HPSD or HPSO models. Spring loaded lever for fast & precise travel.
AD-100 Durometer TesterPrecision Durometer Tester. Can be used in any measurement orientation as gravity does not affect readings.
AD-300 Precision DurometerIs designed to measure the hardness of vulcanized or thermoplastic rubbers, elastomeric or soft plastic materials and silicon products via indentation resistance.
Asker X DurometerAsker X Durometer measures hardness scales: Shore A Normal rubber、Shore D Hard rubber and plastics、Asker C Soft rubber、Asker E Soft rubber、Asker F Urethane foam, sponge
Custom DurometersAvailable in analog and digital models, Precision construction.
DD-100 Digital Durometer TesterPrecision Digital Durometer With Memory & Data Output. Can be used in any measurement orientation as gravity does not affect readings.
DD-300 Digital Precision DurometerHighest available built quality / Highly accurate and repetitive. Adjustable timer function, hold function and Output to PC.
TBKC Durometer Test Block KitsEnables user to perform a quick check for proper durometer operation.
Durometer FixturesCustom fixtures are available for your specific application.
E2 Durometer TesterLightweight, durable, recyclable, magnesium-alloy case. Accuracy ± 1 point.
HP Series Shore DurometerOperation is as easy as pressing the spring-loaded knurled aluminum shell down to the red line.
HP-PT Test Block for curved bottomTest Block for Curved Bottom HP Textile Durometers.
HPSAO Shore DurometerFor use with foams, steering wheels and inner linings of motor vehicles.
OS-300-2 Durometer Test StandThe OS-300-2 Durometer Test Stand is designed for use with the Check-Line AD-300 Analog Durometer.
OTK-AN O-Ring Durometer Testing KitThe Analog Complete O-Ring Hardness Kit is the most convenient and accurate way to perform repeatable hardness (durometer) testing on thin materials.
OTK-DG Digital O-Ring Durometer KitThe Digital Complete O-Ring Hardness Kit is the most convenient and accurate way to perform repeatable hardness (durometer) testing on thin materials.
PT-SHD Shore Hardnesss DurometerDigital Shore Hardness Durometer with data and data output.
PTS-HP Durometer Test StandPTS-HP Durometer Test Stand is designed for smooth, repeatable measurements for hardness testing applications.
QC Model 1500 Vernier DurometerWith its light weight and small size, the user can carry the QC at all times.
RDC-1 Durometer CalibratorAllows users to accurately calibrate durometors in-house.
RX-1000 Mini-Dial DurometerIts small dial face and included leather clip-on carrying case make it easy for an inspector to carry the gauge- for work around the shop, or out in the field.
RX-1600 Precision DurometerAvailable Scales: A, AO, B, CF, D, E, DO, M, O, OO, OOO, OOO-S, (Asker, ISO, DIN & JIS Scales also available, inquire).
RX-1600-A120 Skateboard Wheel DurometerSkateboard Wheel Durometer. Specially designed for the skate community.
RX-2000 Max-Hand DurometerThe RX-2000 durometer is the latest innovation for the testing of specimens with creep. The RX-2000 has a second needle which holds the highest measurement.
RX-2100 Tire Durometer Hardness MeterCalibrated to the ASTM D-2240 standard for durometer hardness. Quickly and accurately checks tire hardness.
RX-3000 Max Hand DurometerMax Hand Durometer. Available Scales: A, D. 18mm Diameter Presser Foot. Holds Reading Until Reset.
RX-4000 Digital DurometerThe RX-4000 Digital Durometer is the perfect instrument for use on the production floor or in the lab for measuring the hardness (Durometer) of rubber and plastic parts.
RX-DD Digital DurometerThe new RX-DD is a precision Digital Durometer ideal for laboratory use.
RX-DD-5 Digital DurometerAdjustable Measurement Timer with Onscreen Countdown. Available Scales: A, D.
RX-DD-ASK-C-SS Digital DurometerRX-DD-ASK-C-SS Durometer for testing for sneaker midsole foam hardness.
RX-DD-MS Digital Multi-Scale DurometerFor the technician that must perform hardness tests on various types of non-metallic materials, we offer the Multi-Scale durometer test kit.
RX-MS Multi-Scale DurometerFor the technician that must perform hardness tests on various types of non-metallic materials, we offer the Multi-Scale durometer test kit.
RX-MS-A-D Durometer KITIncludes a type A and type D barrel along with certified test blocks in a custom carrying case.
RX-SP Slim Probe DurometersSlim Probe Durometer. For testing in hard to reach or irregular areas.
HP Textile DurometerDurometer for Textiles and Yarn Package hardness testing.
HPSA-R Printing Roller DurometerFor Nip / Rubber rollers and Cylindrical materials. Operation is as easy as pressing the spring-loaded knurled aluminum shell down to the red line.
IRHD-MACRO Hardness TesterMacro IRHD Hardness Measuring System. For material thickness 6mm and greater. For testing according to ASTM D1415, DIN ISO 48, ISO 48 and DIN 53505.
IRHD-MACRO Test blockTest blocks for verification of IRHD-MACRO Measuring Device.
IRHD-MICRO Hardness TesterMicro IRHD Hardness Measuring System. For material thickness from 1 to 5 mm. Measures according to DIN ISO 48, ISO 48, ASTM D 1415, BS 903: Part A26.
IRHD-MICRO Test blockTest blocks for verification of IRHD-MICRO Measuring Device
O-Ring Centering Device for IRHD-MICROO-Ring Centering Device for IRHD-MICRO
IRHD X-Table Centering DeviceX-Table Centering Device for IRHD-MICRO
Prism Centering Device for IRHDPrism Centering Device for IRHD and Durometer Stands
610D intelligent fully-automatic needle detector◆The equipment module is imported from Japan and the conveyor belt from the Netherlands;
◆Intelligent integrated circuit chip;
◆Three available functions for choice: 0-10 grades regulation, counting
630E intelligent fully-automatic needle detectorApplicable to detect needle and other iron remains for underwear, shirts, sweaters, down coats, shoes, socks, bed linens and plush toys.
630E-II intelligent dual-insurance needle detector◆The equipment module is imported from Japan and the conveyor belt from the Netherlands;
◆Intelligent integrated circuit chip;
◆Three available functions for choice: 0-10 grades regulation; counting
2000C automatic-transmission needle detector◆Easy operation; being convenient and practical;
◆Indicate the position of needle remains;
◆Stability and sensitivity superior to similar automatic-transmission needle detectors.
2400 Cloth Inspecting MachineAn indispensable equipment applicable to detect needle and other iron remains for cottons, wools, linens, velvets, fibers and fabrics. It adopts electromagnetic speed regulating motor. Stepless speed 
Cloth Inspection MachineAn indispensable equipment applicable to detect needle and other iron remains for cottons, wools, linens, velvets, fibers and fabrics. It adopts electromagnetic speed regulating motor. Stepless speed 
Metal Detector / Metal Needle Detector ZS-630C/B- High delicacy and reliable performance.
- A wide range of applications.
- High anti-jamming ability.
- Best quality assurance with best customer service.
Metal Detector / Needle Detector ZS-620C/B- High delicacy and reliable performance.
- A wide range of applications.
- High anti-jamming ability.
- Best quality assurance with best customer service.
TS97 Needle Detector- High delicacy and reliable performance.
- High anti-jamming ability.
- Best quality assurance with best customer service.
TY-20MJ Needle Detector- High delicacy and reliable performance.
- High anti-jamming ability.
- Best quality assurance with best customer service.
Vacuum ironing tableYTT series Suction hot Taiwan．With Choushi、Zhengqiyundou cooling function and stereotypes supporting the use of improved efficiency．Ironing products after the rapid stereotypes．Die table and convertib
XT2000 Fabric Shrink Inspection MachineAn indispensable equipment applicable to detect needle and other iron remains for cottons, wools, linens, velvets, fibers and fabrics. It adopts electromagnetic speed regulating motor. Stepless speed 
2400 Cloth Inspecting MachineAn indispensable equipment applicable to detect needle and other iron remains for cottons, wools, linens, velvets, fibers and fabrics. It adopts electromagnetic speed regulating motor. Stepless speed 
Cloth Inspection MachineAn indispensable equipment applicable to detect needle and other iron remains for cottons, wools, linens, velvets, fibers and fabrics. It adopts electromagnetic speed regulating motor. Stepless speed 
HD021E+ Electronic single yarn strength testerUsed for testing breaking tenacity, elongation at break of single yarn made of cotton, wool, jute, core-spun yarn etc , at thesame time including synthetic filament, textured.
Adopting high accurac
HD026D Electronic fabric strength testerUsed for testing the mechanics properties of different woven fabric and non-woven fabric made of all kinds of material，it is all functional tester，such as elongation at specified speed，load at specifi
XT2000 Fabric Shrink Inspection MachineAn indispensable equipment applicable to detect needle and other iron remains for cottons, wools, linens, velvets, fibers and fabrics. It adopts electromagnetic speed regulating motor. Stepless speed 
Y101A Electrothermal blast drying chamber
Y108S Yam colour chart windersed for winding the yarn,various synthesizes material and other material of suit to wind etc.,on to a paper tape.this product is newest design for winding various sample cards.
It is especially suita
Y301 Sliver and roving length meter
Y571B、C Rubbing Colour Fastness Tester
YG004E Electronic single fiber strength testerIt is used to determine the performance indexes such as tensile strength,elongation at break etc.to various single fibers.
Technical index:
YG004N Electronic single fiberstrength testerUsed for testing indexes of single fiber, such as breaking tenacity, elongation at break, load at specified elongation, elongation at specified load, creep, etc
YG020B Electronic single yarn strength testerUsed to test the strength break rate (CRE) of cotton, wool, linen and other synthetic fibers.
YG029C Fully automatic single yarn strength testerUsed for testing breaking tenacity, elongation at break of single yarn, synthetic fiber filament,textured yarns.
Controlled by PC, the whole test process is automatic. Mode:CRE.
YG362 Fibre crimp elasticity testerUsed for measuring the crimpness, Percentage of crimp elasticity, crimp recovery and their statistics value of 1~22 dtex fibre. It has display & print function.
YG461E Numerical type fabric permeability instrumentIt is used to test the air permeability of various woven fabrics, knitted fabrics,
non-woven fabrics, industrial filter materials etc.
YG611E sun exposure and weathering testerIt is used for the color fastness to light and weathering, photo aging test to the colored materials such as various colored textile, leather, artificial leather, plastics and so on.
YG701D Fully Automatic fabric shrinkage testerTest the washing shrinkage of cotton, wool, silk, linen, chemical fabrics and knitting fabrics.
YG747C Full-automation ventilated fasteight-basketovenUsed to test the moisture content and moisture regain of all kinds of textile material and production.
Made by patent techology, entirely
Germany SCHMIDT Sewing Thread Tension MeterUniversal yarn or sewing thread tension meters for textiles and garment industry. It is the best selling tension meter worldwide.
HP 2510 F0L95A (HP45) INKFOR INKJET CUTTING PLOTTERS
Memmert UF260 Universal OvenPerfected masterpiece leaves nothing to be desired in terms of ventilation and control technology, over temperature protection and precisely tuned heating technology.
SDL ATLAS Random Tumble Pilling Tester M227R/S (PT-2)The longstanding standard instrument for the ASTM D3512 Test Method, the SDL Atlas has provided consistency in pilling tests for decades. 
SDL ATLAS M021A Air Perm Air Permeability TesterThe AirPerm makes air permeability testing much more affordable while maintaining confidence that test results meet international and retailer standards. 
Mullen Model C Burst Strength TesterMullen® is cited in many TAPPI, ASTM, INDA and International Standards – and when it comes to quality control, our tester is an integral part of any well-equipped lab.
FX-300 Permeability TesterMeasure the air permeability of various materials such as fabrics, clothing, and non-woven fabrics.
James Heal 290 Perspirometer / Phenolic YellowingPerspiration Tester for testing the colour fastness of textiles to perspiration and Phenolic yellowing.
Miele PW 6065 Vario Washing machine (For NIKE)Washing machine, electrically heated Special voltage for offshore and marine use, equipped with drain pump.
MKM Mechanical Tension MeterTension Meter with Motorized Take-up Wheel. Designed for setting yarn tension devices.
LSA Multi-Function Precision Electronic BalanceWith Dynamic weighing and Percentage weighing function
Spray Rating Tester TF160Spray Rating Tester, to determine the surface wetting resistance of fabrics.
AATCC Stainless Steel Funnel and Cylinder Set 58756AUse the Stainless Steel Funnel and Cylinder for AATCC Test Method TM170.
Filler Yarn for Cross-Sections, Black & White 59144AFiller Yarn is used to prepare fiber cross sections as described in AATCC Test Method TM20.
AATCC Wrinkle Tester 68391AThe Wrinkle Tester is used to induce uniform wrinkling according to AATCC Test Method 128, Wrinkle Recovery of Fabrics: Appearance Method. Item #68391A
AATCC 5-lb Cylinder Weight 68381A5-lb cylindrical, stainless steel weight (6.4-cm diameter) for use in AATCC Test Method 130, Soil release: Oily Stain Release Method.
Schröder Martindale Abrasion & Pilling Tester RF3169N9 Positions
KMS+Q Martindale Abrasion & Pilling Tester MTD-6 6 Positions
Schröder Random Tumble Pilling Tester RF31944 Chambers
KMS+Q Random Tumble Pilling Tester RPT-2 / RPT-42 chambers or 4 chambers
Schröder Pilling & Snagging Tester RF3182 & 3184N4 pilling boxes
KMS+Q Pilling Tester ICI-2 / ICI-4, ICI 2 or 4 polymer plastic pilling boxes
Schröder Mace Snagging Tester RF308Testing the Knitted and woven fabrics and other fabric easily to snag, especially applied to the filament and textured yarns fabric.
Schröder CM-1 Manual AATCC Crockmeter / ISO Rubbing Fastness TesterIt determines the colour fastness of textiles, fabrics, leather, PVC to dry or wet crocking or rubbing.
Schröder RF3176 Electronic AATCC Crockmeter / ISO Rubbing Fastness TesterIt determines the colorfastness of textiles to dry or wet rubbing.
Schröder RF3178 (CM-6) Rotary CrockmeterIt determines the color fastness of textiles to dry or wet rubbing particularly for printer fabrics.
KMS+Q MRF Motorised UPC Rubbing Fastness TesterUsed in various textiles industries such as cotton, wool, knitting and printing for determining the colour fastness of Dry/Wet Crocking test. 
Schröder Perspiration Tester (PerspirOmeter)AATCC / ISO Perspiration Tester (PerspirOmeter) can be universally applicable to determine for fading or dyeing-movement in textile
Schröder RF6018E Launder-Washtex ColorFastness TesterRotation speed is 40rpm, water temperature is up to 95 ˚C, max. 20 containers of 1200ml or 20 containers of 550ml
Schröder RF6028E Launder-Washtex ColorFastness TesterRotation speed is 40rpm, 95˚C Maximum and hold up to 8 units of 1200ml containers or 8 units of 550ml specimen containers.
Roaches PA2 Washtec Colorfastness TesterIt has been exclusively designed to allow the user to utilise equal numbers of 550ml (ISO) pots and 1200ml (AATCC) pots during the same wash cycle.
Solarbox 1500e, Tabletop Xenon Light Fastness TesterRadiant energy in the SOLARBOX is provided by a single superior air-cooled Xenon Lamp generating an irradiance level up to two times the sun one.
Roaches OPTI-THERM Thermal Stability and Colour Fastness to Hot PressingAccurately controlled dry heat conditions are required on the surfaces of two flat heater plates.
Schröder RF4418 Spray Test ApparatusCompare with spray test rating chart, evaluating the grade by water remained on the specimen surface when test ends.
Schröder RF4408P Hydrostatic Head Tester (Pneumatic Press)The two kinds of testing methods are dynamic and static method.
Schröder RF306A Auto-Burst Strength Tester (Pneumatic)Testing the Knitted, Woven and Non-woven fabrics, papers and carton board for largest height and bursting pressure values.
Thwing-Albert 60-2001 Elmendorf Tearing Strength Tester (Mechanical)To determine the ballistic tearing strength of textiles, paper or board. Range from 0 to 6400 grams with suitable pendulum and augmenting weight.
Paramount tearTester-I Elmendorf Tearing Strength Tester (Mechanical)To determine the ballistic tearing strength of textiles, paper or board. Range from 0 to 6400 grams with suitable pendulum and augmenting weight. 
Schröder BC1002B Stretch Testing InstrumentThis instrument is suitable for the ductility and flexibility of knitted and woven fabrics
Schröder SF-10K Seam TesterDisplay the reading of Dial Force Scale range capacity: 0 to 30kg.(Optional Digital Force Gauge)
Schröder BC2001C Sharp Edge Tester with Teflon TapeUsed to rule out articles that present an unreasonable risk of injury by avulsion or laceration due to sharp metal or glass edges.
Roaches Zip Slide Fasteners Reciprocating TesterThe ZIP TESTER is specifically designed to permit the mechanical testing of slide fasteners in accordance with British Standards
Schröder Motorized Wrap Reel Testing MachineDesigned to produce skeins of yarn of a predetermined length and number of turns for count and / or strength testing.
ILE Model ILE-ITC-5M Motorized Twist TesterMotor operated twist tester, for plied and singles yarn, 0-20 inches or 0-50 cm.
Electric Wrap Reel Testing MachineUsed to measure a certain length of yarn and use it with a balance to calculate the yarn count and yarn strength.
NO.313 Appearance Uniformity Blackboard MachineThis machine evenly rolls the yarn on a black (white) board to observe the appearance of neps in the yarn.
NO.314 Yarn Color Sample Card WinderThis machine can wind up the thread to certain area on a card to observe the surface structure and color of the thread.
NO.323 Rain TesterThis testing machine is designed and manufactured in accordance with the AATCC Test Method 35-1985 specification
NO.328 Pilling TesterUses this as a basis to wind the pattern on the rubber tube and rotate it in the rotary box for a certain period of time
NO.329 Elmendorf Tearing Strength TesterTests the warp and weft directions of the fabric 5 times and then calculates the average value.
NO.331 Dyeing Rubber TesterAccording to test Standard: 499, 3843, 8432, JIS-L0801, L0849, L1006, L1084, K6328, P8136.
AATCC VIEWING BOARD·Built to American Association of Textile Chemists and Colorist (AATCC) approved test methods 88B/88C/124/128/143/178.
·The AATCC Viewing Board is designed for the evaluation of smoothness in the a
Edge TrimmerSuitable for textiles like cotton, hemp, wool,silk, synthetics.
Fabric Weight Evaluation Kit Schröder GSM Circular CutterAccurately cut out 100cm2 speciment (diameter 113mm)
James-heal Sample Cutters / GSM CutterVirtually any type of material can be cut, including woven, nonwoven and knitted textiles, carpet, film, foam, paper and board.
The cutters can handle material thicknesses up to about 5mm. If you ne
Sample Cutters/Circular Cutter- 100cm2 sampling range.
- Accurate measurement and convenient operation.
- Widely used in textiles, paper, packing, scientific research and other industries.
ZO-50 Manual sample & pattern cutterUsed to cut basketwork sample,Switzerland technology and import steel reamer is durable,operation is easy.
Humana Snap Test KitIt's for test and record the tensile strength separation of the finished clothes, toys, footwear and so on.
Humana Tension Meter for Stretch FabricTensile test for fabric used in brassieres (Bra), underwear, swimwear and other stretchable fabric.
MK-720/720L Corona Discharge CheckerCorona Discharge Detector detects deterioration of insulation during hot (powered) line conditions.
PosiTector PT-SST Soluble Salt TesterConductivity probe specifically designed for ISO 8502-6,9. Displays test duration, sample temperature, conductivity (µS/cm) and surface density (mg/m2 or µg/cm2)
TIME3200 Surface Roughness TesterThe TIME3200 Surface Roughness Tester is designed to measure in Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv,R3z, RS, RSm, RSk and Rmr units.
UV sterilization light TunnelUltraviolet radiation can kill a variety of microorganisms, including bacterial propagules, spores, mycobacterium, viruses, fungi, Rickettsia and mycoplasma, with a broad spectrum. 
GRAPHTEC CUTTER / PLOTTERS SPARE PARTSGRAPHTEC CUTTER / PLOTTERS SPARE PARTS
AATCC Stainless Steel Ring-for Filter Paper TM146 58380AThe Stainless Steel Ring holds filter paper in place for testing according to AATCC Test Method 146, Dispersibility of Disperse Dyes: Filter Test.
AATCC Dye Dusting Paper Collars 58727ADye Dusting Paper Collars are used in AATCC Test Method TM170, Dusting Propensity of Powder Dyes: Evaluation of. 50 collars.
Schröder BC1009C (Trolley) / BC1009D (Wall Mounted) AATCC Appearance Viewing BoaAATCC 88B, 88C, 124, 128, 130, 143, 178
GB/T 19980
ISO 7768, 7769, 7770, 15487
JIS, etc
Schröder BC2002 Sharp Point Tester with Weight MassAids in determining items that pose a risk of injury by puncture or laceration due to nonfunctional sharp points.
Schröder PH-050A Laboratory OvenThe drying (Oven) / cultivating (Incubator) cases for dual-purpose which is forced-air convection by blower Fans can provide direct assistance
Schröder Mechanical Differential Blood Cell CounterThere are six keys, and each key can record up to 999.
The AT-VERIFY is ideal for checking the accuracy and operation of our AT-A and AT-M Adhesion Testers and is an important component in fulfilling both ISO and in-house quality control requirements.
The new AT-A Automatic Adhesion Tester measures adhesion of coatings to metal, wood, concrete and other rigid substrates and now features a new electronically controlled hydraulic pump.
The Positest AT Measures adhesion of coatings to metal, wood, concrete and other substrates - Revolutionary self-alignment feature and pull rate indicator brings new meaning to adhesion measurements.
Exceptionally strong and handy cross hatch cutter made on the lines of DIN EN ISO 2409 and ASTM D3359-02 to conduct cross cut tests. The SecoTest is used for the assessment of adhesiveness of single o
Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 50 mm dollies. Ideal for lower bond strength finishes such as coatings on wood, concrete and plastic.
Interchangeable stand-off allows a PosiTest ATM50 or ATA50 to pull 10, 14 and 20 mm dollies. Ideal for high bond strength finishes such as coatings on metal.
Ideal for measuring the tensile strength of concrete surfaces and concrete repairs and overlay materials.
Interchangeable stand-off allows a PosiTest ATM or ATA to pull 50 mm x 50 mm square dollies conforming to BS EN 12004-2. Ideal for cementitious adhesive for tiles.
Loading fixtures, stubs for adhesion testing.
1.LCD display.
2.Test pin configuration for 10/100 base-T cable, 10 base-2 cable, RJ45/RJ11 modular cables, AT and T 258 A cable, EIA/TIA 568A/568B cables and Token Ring Cables etc.
3.Verify cable
1.Detects opens, shorts, miswires and split pairs on the twisted pair cabling on the LAN cable.
2.Measures length.
3.Auto backlit.
4.Auto power off.
5.The backlit LCD screen displays graph wire-m
1.Detects opens, shorts, miswires and split pairs
2.on the twisted pair cabling.
3.Measures length.
4.Low battery detector.
5.Auto backlit.
6.Auto power off.
7.The TM-903 Multimedia Cable Teste
1.Compatible with 2.5mm universal Ferrule connetcor(FC) for visually identifies and locates faults in fibre optic cabling.
2.Easy to identify the connection by the continuous and flashing modes.
3.L
iWave gloss meter is designed and manufactured with the reference to the international standard ISO 2813 and China national standard GB/T9754. Technical parameters are in accordance with ASTM D2457, A
WG68 gloss meter is produced according to the national verification regulation of JJG696 standard, adopt long life light source, good repeatability, small volume, high precision and good stability. It
A balance to perform simple weighing tasks, suitable for factory or laboratory When used in conjunction with the Fabric GSM Circular Cutter are weight in g/m2 or oz/yd2 can be obtaine
- Accurate and reliable measurement with high delicacy.
- Convenient maintenance.
- Confirms to international OIML standard.
- Certified and authorized by China Quality and Technology Supervi
- Original Japan-made scale.
- Accurate and reliable measurement with high delicacy.
- Confirms to international standards.
- Suitable for gold ornaments, print, textiles, color matching and 
Easy-to-use balance for your essential needs: 220 g capacity, 0.1 mg readability, 4.5" touchscreen, external adjustment
Raytek MT4 MiniTemp is pocket-sized and easy to use - just point, shoot and read the temperature on the large backlit display. When you need a fast, easy, safe way to measure surface temperature, you
- Professional infrared temperature tester.
- Improved optical system with higher resolution.
- A wide range of temperature measurement.
- High accuracy and sensitivity.
- Reasonable price
